Technical data

5.8 RIP Settings 114
5.8 RIP Settings
The Routing Information Protocol (RIP) is one of the most com-
monly used interior gateway protocol (IGP) routing protocols on
internal networks (and to a lesser extent, networks connected to
the Internet), which helps routers dynamically adapt to changes
of network connections by communicating information about
which networks each router can reach and how far away those
networks are.
For the protocol RIP (Routing Information Protocol) please define
the routes for the traffic in your network in the routing table. You
can specify the version of the protocol as well as the required
direction of action.
Figure 5.20: RIP
Note: There is no need to enable RIP. Default: disabled.
Enable the option RIP and choose a protocol (RIP v1, RIP v2 or
RIP v1 compatible).
To save the settings, click on SAVE.
To discard all recent entries click on DISCARD ENTRY.