Specifications

APPENDIX
Using the Configuration Utility
The D-Link AirPlus Configuration Utility window will appear. By default, it will take
you to the Link Info section.
A. Status: Displays the
MAC Address of the
Access Point that
is associated with the
DWL-520+.
B. SSID: The Service Set
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default.
C. TxRate: The default
setting is 11 Mbps; however,
TxRate settings are auto-
matically determined by the
DWL-520+ depending on the
distance from the access point.
D. Channel: Displays
the channel information.
By default, the channel is
set to 6 and selection is
automatically determined
by the DWL-520+.
E. Link Quality / Signal Strength:
Displays the Link Quality for the DWL-
520+ wireless connection to the access
point. The Signal Strength represents the
wireless signal between the access point
and the DWL-520+. The percentage
coincides with the graphical bar.
F. Data Rate:
Graphically
displays the
statistics of data
transmitted and
received.
A
B
C
D
E
F