User's Guide Wireless Access Point DWL-6000AP

The Configuration Menu for the DWL-6000AP is web-based. The DWL-

6000AP can be set up using any current web browser, i.e., Internet Explorer

5.5 (or newer), or Netscape Navigator 4x (or newer).

Using the Configuration Menu

The computer that you are using for initial configuration must have an IP Address

within the same range as the IP Address of the DWL-6000AP. The DWL-

6000AP has a default IP Address of 192.168.0.50 with subnet mask

255.255.255.0

If you are not using a D-Link router in your network, you will need to assign a

Static IP Address to the computer that you are using to configure the DWL-

6000AP, within the IP Address Range of the DWL-6000AP. For instance, you

can assign a static IP address of 192.168.0.2 with subnet mask of 255.255.255.0

(Please see Networking Basics in this manual for information on Assigning

a Static IP Address.)

Factory Default Settings for the DWL-6000AP

SSID for 802.11a default

and 802.11b

Channel 36, 6

WEP disabled

User Name admin (lower case)

Password (no password, leave field blank)

IP Address 192.168.0.50