Specifications

5. Installing the DWL-520+

Before you start, make sure to turn off your computer

and unplug the power cord.

Note: To avoid damage caused by static electricity, make sure to properly ground

yourself by first touching a metal part of the computer to discharge any static

electricity before working with the DWL-520+.

Installing the PCI Card

• Remove the back cover of the

computer

• Install the DWL-520+ carefully and

firmly into an available PCI slot

which is usually “white” or “cream”

colored

• Secure the DWL-520+ with a

screw

• Replace the computer’s cover

Fig. 5.1

Installing the Drivers

• Plug in the power cord and turn on your computer

• The Found New Hardware

Wizard screen appears

Fig. 5.2

D-Link AirPlus Wireless PCI Adapters

• Insert the Driver CD into

the CD-ROM drive

• Close the initial Autorun

screen and continue with

the installation

• Select Install from a list

or specific location

(Advanced)

• Click Next

Note: If Found New Hardware Wizard does not automatically start, go to

Start > Settings > Control Panel > Add Hardware and follow the

instructions to complete the installation process.