User manual

56D-Link Wireless AC Dual-Band ADSL Router User Manual
Section 3 - Conguration
Add QoS Classication Rules
Classify Type:
Check to enable or disable the IPv6 Filter.
Active:
Select to enable or disable this rule.
Application:
Select the pre-dened application type or
choose Not Matched.
Physical Ports:
Choose the LAN Interface.
Destination MAC
address:
Enter the destination MAC address for the
rule. If data packets include the MAC address,
the data packets are placed into the group.
Destination IP address:
Enter the destination IP address for the rule.
If data packets include the IP address, the
data packets are placed into the group.
Destination Subnet
Mask:
Enter the destination subnet mask for the
rule.
Destination Port Range:
Enter the destination port range. (eg. UDP/
TCP port range)
Source MAC address:
Enter the source MAC address. If data packets
include the MAC address, the data packets
are placed into the group.
Source IP address:
Enter the source IP address. If data packets
include the IP address, the data packets are
placed into the group.
Source Subnet Mask:
Enter the source subnet mask.
Source Port Range:
Enter the source port range. (eg. UDP/TCP
port range)
Protocol:
Select the pre-dened protocol type or
choose Not Matched.