User manual

96D-Link DIR-880L User Manual
Section 4 - Conguration
Wireless (Bridge Mode)
Enter the network name (SSID) of the network you are trying to
connect to.
Choose None, WEP, or WPA/WPA2-(Personal)depending on the
security used by the network you are trying to connect to.
Select the length of the password used by the network you are trying
to connect to (WEP only).
Enter the existing network's wireless password. (WEP, WPA/WPA2
only)
Click Save when you are done.
Wireless
Network Name:
Security:
Password
Length:
Password:
In the Settings menu on the bar on the top of the page, click Wireless to see the
wireless conguration options. In Bridge Mode, the wireless function allows you to
connect to an existing wireless network. You can either enter the settings manually,
or click Scan to search for visible wireless networks (see below).
To scan for available wireless networks, click Scan, then click on the wireless network
you want to connect to. You can see the wireless signal strength of each network,
and the padlock icon means that a password is required to connect to that network.
Click Select to nalize your choice, then Save when you are done.