Specifications

61
If you are unsure of the IP Address of the camera, you can click on Search to search for all available cameras that are installed on your local area network.
NOTE:
Only cameras on your local area network can be located using Search in IPView SE. If you want to add a camera via the Internet, you must enter in a
public IP Address. Please note that if your camera is behind a router, you will need to enter your router’s WAN IP followed by a colon, then the port
number that is assigned to your camera. As in example 10.10.10.80:800, where 10.10.10.80 is your router’s WAN IP and :800 is the port that your camera
is using.
Highlight the camera you wish to add and click on Add. The camera will automatically be added into the IPView SE list view. If you add the same camera more than
once you will receive the following message (see below).
If the Login Camera dialog box appears, make sure to enter the correct User Name and Password. Click OK. The camera will be added into IPView SE. If the User
Name and Password are entered incorrectly, the camera will not be added into IPView SE.
The Login Camera dialog box will appear only if your have already set the Username and Password during the Web Configuration setting.