Specifications

41
SETUP > Time and Date
This option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and
set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically adjust the time when needed. After done the configuration, you
may click Save Settings button to save the new settings or Don’t Save Settings button to abandon it.
Time and Date –
The system of your IP camera provides you two methods of time configuration: Automatic or Manual:
For automatic method, check the Synchronize NTP Server checkbox first, and then enter the IP address or domain name of the time server. Leaving the box blank
will connect the camera to default time servers.
For manual method, check the Set Manually. It will allows you to manually set the time by specifying a specific date [yyyy-mm-dd] and time [hh:mm:ss]. Otherwise,
you may synchronize the date and time of the camera with the local computer by checking the Synchronized with Computer Time box.