Specifications

40
FTP Server –
y Host Address: This is the IP address of the FTP server that you will be connecting to.
y Port Number: Default is port 21. If changed, external FTP client program must change the server connection port accordingly.
y User Name: Specifies the user name to access the external FTP server. If you are to upload snapshots to an FTP server you will need to fill in the Domain name
or IP address of your external FTP server.
y Password: Specifies the password to access the external FTP server.
y Directory Path: Specifies the destination folder in the external FTP server.
y Passive Mode: Enabling passive mode will allow access to an external FTP server if your camera is behind a router protected by a firewall.
Time Schedule – Checking this box will enable video upload to the FTP server you selected.
y Always: Selecting this will allow snapshot upload to your FTP as soon as you click Apply.
y Schedule: Selecting this will allow you to configure the times that you want the snapshots to be uploaded to your FTP server by the days, hours, minutes, and
seconds.
y Video Frequency: User can select in frames per second (1, 2, 3 or auto, in auto this could go to 4). The user can also select how many seconds (from 1 to 65535
seconds) for each frame.
y Base File Name: This will be the name that precedes the time, for example, 9002005072116425101.jpg. This means that the camera took a snapshot in the year
2005, July 21 at 16th hour (4 o’clock), 42 minutes and 51 seconds and it is picture number one.
y File:
- Select overwrite and there will only be a few images that are constantly refreshed depending on how many snapshots you choose to have sent.
- Select date/time suffix and the pictures will be named with a date and time also. An example of this can be seen above under the Base file name category.
- Select sequence number suffix up to 1024 and all the pictures will be numbered from 1-1024. The total amount of pictures can be configured up to 1024
pictures. Picture number 1025 will be 1 again.
Test FTP Server – Click Test button will send a snapshot to the FTP server that you have configured in the Upload section. If you have configured the FTP correctly
you will be able to see a test file in your FTP server.