User`s guide

DSL-502G ADSL Router User’s Guide
42
Static Route Configuration – Modify/Add
Figure 23. Static Route Configuration Menu
To add or modify a static route, define the following parameters:
Name
Provide a name for the static route or subnet (optional).
IP Address
Type in the IP address of the subnet or device where packets are routed.
Subnet Mask
Type in an appropriate subnet mask that allows the static route to function.
Gateway
Type in the IP address of the gateway used for traffic destined for the specified
subnet or device.
Metric
Type in the maximum number of hops allowed for the static route.
State
Enable of disable the route using the drop-down menu.
Click on OK to put the static route into the table. It will appear in the Static Route Table shown previously.
To clear the settings for this configuration, click the Clear button.
To return to the Static Route Table, click the Exit icon.