User`s guide

DSL-502T ADSL Router User’s Guide
Line Splitter
If you are instructed to use a “line splitter”, you must install the device between the Router and the
phone jack. Use standard telephone cable with standard RJ-11 connectors. The splitter has three
RJ-11 ports used to connect to the wall jack, the Router and if desired, a telephone or telephone
device. The connection ports are typically labeled as follows:
Line - This port connects to the wall jack.
ADSL – This port connects to the Router.
Phone – This port connects to a telephone or other telephone device.
The diagram below illustrates the proper use of the splitter.
ADSL Router
Line Splitter Installation
60