Specifications

DGS-3212SR Stackable Gigabit Layer 2 Switch
Figure 9- 17. About window
NOTE: Upon this firmware release, some functions of the SIM can only be
configured through the Command Line Interface. See the DGS-3212SR
Command Line Interface Reference Manual for more information on SIM and its
configurations.
Firmware Upgrade
This screen is used to upgrade firmware from the Commander Switch to the Member Switch. Member Switches will be
listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name and
Version. To specify a certain Switch for firmware download, click its corresponding check box under the Port heading. To
update the firmware, enter the Server IP Address where the firmware resides and enter the Path/Filename of the firmware.
Click Download to initiate the file transfer.
Figure 9- 18. Firmware Upgrade window
Configuration File Backup/Restore
This screen is used to upgrade configuration files from the Commander Switch to the Member Switch. Member Switches
will be listed in the table and will be specified by Port (port on the CS where the MS resides), MAC Address, Model Name
and Version. To specify a certain Switch for upgrading configuration files, click its corresponding radio button under the
Port heading. To update the configuration file, enter the Server IP Address where the firmware resides and enter the
Path/Filename of the firmware. Click Download to initiate the file transfer.
Figure 9- 19. Configuration File Backup/Restore window
197