Specifications

DGS-3212SR Stackable Gigabit Layer 2 Switch
AES128-CBC
Use the pull-down menu to enable or disable the Advanced Encryption Standard
AES128 encryption algorithm with Cipher Block Chaining. The default is Enabled.
AES192-CBC
Use the pull-down menu to enable or disable the Advanced Encryption Standard
AES192 encryption algorithm with Cipher Block Chaining. The default is Enabled.
AES256-CBC
Use the pull-down menu to enable or disable the Advanced Encryption Standard
AES256 encryption algorithm with Cipher Block Chaining. The default is Enabled.
ARC4
Use the pull-down menu to enable or disable the Arcfour encryption algorithm. The
default is Enabled.
Cast128-CBC
Use the pull-down menu to enable or disable the Cast128 encryption algorithm with
Cipher Block Chaining. The default is Enabled.
Twofish128
Use the pull-down menu to enable or disable the twofish128 encryption algorithm. The
default is Enabled.
Twofish192
Use the pull-down menu to enable or disable the twofish192 encryption algorithm. The
default is Enabled.
Twofish256
Use the pull-down menu to enable or disable the twofish256 encryption algorithm. The
default is Enabled.
Data Integrity Algorithm
HMAC-SHA1
Use the pull-down menu to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the Secure Hash Algorithm encryption. The
default is Enabled.
HMAC-MD5
Use the pull-down menu to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the MD5 Message Digest encryption
algorithm. The default is Enabled.
Public Key Algorithm
HMAC-RSA
Use the pull-down menu to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the RSA encryption algorithm. The default is
Enabled.
HMAC-DSA
Use the pull-down menu to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the Digital Signature Algorithm encryption.
The default is Enabled.
Authentication Algorithm
Password
This parameter may be enabled if the administrator wishes to use a locally configured
password for authentication on the Switch. The default is Enabled.
Public Key
This parameter may be enabled if the administrator wishes to use a publickey
configuration set on a SSH server, for authentication. The default is Enabled.
Host-based
This parameter may be enabled if the administrator wishes to use a host computer for
authentication. This parameter is intended for Linux users requiring SSH
authentication techniques and the host computer is running the Linux operating
system with a SSH program previously installed. The default is Enabled.
Click Apply to implement changes made.
126