User`s manual

CM-030PMCL-RH
6
4. Locations and Functions
 CCD sensor 1/2 inch CCD sensor
 Lens mount Excluding mount M15.5 x 0.5
 Lock ring Is used to fix the focus position
 Camera head φ17mm Camera Head
 Camera cable 2m
 12-pin connector Connecting with CCU
 12-pin receptacle Connecting with Camera Head
 26-pin connector POCL, Camera Link Interface (Mini-CL) (Note *1)
 LED Indication for power and trigger input
 Mounting holes M3 depth 3.5mm for tripod mount plate
*1) Note: When a Camera Link cable is connected to the camera, please do not excessively
tighten screws by using a screw driver. The Camera Link receptacle on the camera
might get damaged. For security, the force to tighten screws should be less than
0.291 Newton meter (Nm). Tightening by hand is sufficient in order to achieve this.
The camera link cable must comply with PoCL standard.
Fig. 1. Locations ( version)
.oNla
i
reS
Z
①
②
③
④
⑤
PoCL
POWER /TRIG
laesCCF
.oNlaireS
laesnoituaC
⑥
⑦
⑧
⑨