User`s manual

CM-030PMCL-RH
26
Save Settings. SA
This command will store the actual camera settings to 1 of the 3 user area in the camera
EEPROM.
EEPROM Area. EA
If received, the camera will return the last used user area number.
7.4. CM-030PMCL-RH command list
Command Name
Format
Parameter
Remarks
A - General settings and utility commands.
1
Echo Back
EB=[Param.]<CR><LF>
EB?<CR><LF>
0=Echo off
1=Echo on
Off at power up
2
Camera Status
Request
ST?<CR><LF>
Actual setting
3
Online Help
Request
HP?<CR><LF>
Command list
4
Firmware
Version
VN?<CR><LF>
3 digits
(e.g.) 100 =
Version 1.00
5
Camera ID
Request
ID?<CR><LF>
max 10
characters
6
Model Name
Request
MD?<CR><LF>
max 11
characters
7
User ID
UD=[Param.]<CR><LF>
UD?<CR><LF>
User can save
and load free
text.(11 or less
characters)
B – Shutter
1
Shutter Mode
SM=[Param.]<CR><LF>
SM?<CR><LF>
0=Preset Shutter
1=Programmable exposure
2
Preset Shutter
SH=[Param.]<CR><LF>
SH?<CR><LF>
0=Off, 1=1/250, 2=1/500,
3=1/1000, 4=1/2000,
5=1/4000, 6=1/8000,
7=1/10000, 8=1/15000,
9=1/30000
Available when
SM=0.
3
Programmable
Exposure
PE=[Param.]<CR><LF>
PE?<CR><LF>
2 to 511
Available when
SM=1.
C - Trigger mode
1
Trigger Mode
TR=[Param.]<CR><LF>
TR?<CR><LF>
0=Normal (Continuous)
1=EPS(Edge pre select)
2=PWC(Pulse width
control)