User`s guide

8-port Gigabit Ethernet Switch User’s Guide
73
2. IP Routing with IEEE 802.1Q VLAN support: the switching process is based upon the IP source
and destination addresses, if present. If the IP addresses are not present, the switching process is based
upon the MAC addresses (as in Layer 2 above). 802.1Q VLANs are supported and the Switch is considered
as a VLAN-tag aware device.
The Switch must be rebooted when changing the operation mode before the new operation mode can take effect.
Changing the Switch Operation Mode
To change the Switch’s operating mode:
Highlight Switch Settings on the Main Menu and press Enter.
Figure 6-18. Switch Settings screen
Highlight Switch Operation Mode on the Switch Settings menu and press Enter.