User`s guide

8-port Gigabit Ethernet Switch User’s Guide
71
Figure 6-16. Configure Ports screen
To configure a specific port, toggle the Configure Port from [ ] to [ ] field until the appropriate port numbers
appear.
Toggle the State:< > field to either enable or disable a given port.
Toggle the Speed/Duplex:< > field to select the speed and duplex state of the port. There are two choices: Auto and
1000M/Full. Auto allows the port to automatically determine the fastest settings the device the port is connected to can
handle, and then to use those settings. There is no automatic adjustment of port settings with any option other than Auto.
Serial Port Settings
The Serial Port Settings screen allows the configuration of the Switch’s serial port through either the console port or
through use of the Telnet protocol.
Highlight Serial Port Settings and press Enter.