User`s guide

8-port Gigabit Ethernet Switch User’s Guide
62
Once the Switch configuration settings have been saved to NV-RAM, they become the default settings for the switch.
These settings will be used every time the Switch is rebooted.
Reboot
The only way to change the configuration stored in NV-RAM is to save a new configuration using Save Changes from the
Main Menu or to execute a factory reset from the System Reboot menu (click Reboot on the Main Menu). This
will clear all settings and restore them to their initial values listed in the Appendix. These are the configuration settings
entered at the factory and are the same settings present when the Switch was purchased.
Figure 6-7. Reboot menu
Highlight the desired option on the menu above and press Enter.