User`s guide

8-port Gigabit Ethernet Switch User’s Guide

213

RJ-45 PIN SPECIFICATION

When connecting the Switch to another switch, a bridge or a hub, a normal cable is necessary. Please review the following

for matching cable pin assignment.

Figure B-1. The standard RJ-45 receptacle/connector

RJ-45 Connector pin assignment

Contact Media Direct Interface

Signal

1 Tx + (transmit)

2 Tx - (transmit)

3 Rx + (receive)

4 Not used

5 Not used

6 Rx - (receive)

7 Not used

8 Not used

Table B-1. The standard Category 3 cable, RJ-45 pin assignment