User`s guide

8-port Gigabit Ethernet Switch User’s Guide
206
Upgrade Firmware from TFTP Server
Note: The TFTP server must be on the same IP subnet as the Switch.
The following figure and table describe how to update the Switch’s firmware from a server.
Figure 7-77. Upgrade Firmware from TFTP Server screen
Items on the screen above include:
• Server IP Address – The IP address of the TFTP server.
• Path and File Name – The full file name, including path, of the new firmware file on the TFTP server.
Download Configuration File from TFTP Server
A configuration file can be downloaded from a TFTP server to the Switch. This file is then used by the Switch to configure
itself.
Figure 7-78. Download Configuration File from TFTP Server screen
Items on the screen above include:
• Server IP Address – The IP address of the TFTP server.
• Path and File Name – The full file name, including path, of the configuration file on the TFTP server.
Upload Configuration File to TFTP Server
The Switch’s current settings can be uploaded to a TFTP Server by the Switch’s management agent.