User`s guide

8-port Gigabit Ethernet Switch User’s Guide
169
• Interface – The name of the IP interface that the IGMP static member belongs to.
• IGMP Static Group – The IP address of the IGMP static group.
• Port Members – The ports that comprise the IGMP static group.
• State – This indicates whether the IGMP static group is enabled or not.
• New – Click this hyperlink to access the IGMP Static Member Configuration – Add screen
• Delete – Click this hyperlink to delete a table entry.
Add an IGMP Static Member
The following window allows you to add an IGMP static member. Click on the Exit icon to return to the main IGMP
Static Member Configuration window.
Figure 7-31. IGMP Static Member Configuration – Add screen
Items on the screen above include:
• Interface Name – The name of the IP interface that the IGMP static member will belong to.
• IGMP Static Group – The IP address of the IGMP static group.
• IGMP Static Group MAC Addr – The MAC address of the IGMP static group.
• State – This allows you to enable or disable the IGMP static group.
• Port Membes – Check the ports that comprise the IGMP static group.
DVMRP Interface Configuration
The following window is used for the configuration of DVMRP on the Switch (Layer 3 mode only).