User`s guide

8-port Gigabit Ethernet Switch User’s Guide
161
Note: A VLAN that does not have a corresponding IP interface defined for it, will function as a Layer 2 Only
VLAN – regardless of the Switch Operation mode.
Figure 7-17. Setup IP Interface screen
Items on the screen above include:
• Interface Name – Displays the name of the IP interface corresponding to the IP address and subnet mask.
• IP Address – The IP address of the IP interface (sometimes referred to as a network address).
• Subnet Mask – The subnet mask corresponding to the IP address and IP interface name.
• VID – The VLAN ID of the VLAN corresponding to this IP interface.
• Active – Displays whether the IP interface is active or inactive.
• New – A link to the IP Subnet – Add menu.
• Delete – Click this icon to delete an IP subnet from this table.
IP Subnet - Edit
The following window is used to add or modify an IP interface to the Switch.
Figure 7-18. IP Subnet - Edit screen
Items on the window above include: