User`s guide

DES-3226S Layer 2 Switch CLI Reference
88
show packet ports
Purpose Used to display statistics about the packets sent
and received by the switch.
Syntax
show packet ports <portlist>
Description This command is used to display statistics about
packets sent and received by ports specified in
the port list.
Parameters
<portlist> − specifies a range of ports to be
displayed. The port list is specified by listing the
lowest switch number and the beginning port
number on that switch, separated by a colon.
Then the highest switch number, and the
highest port number of the range (also
separeted by a colon) are specified. The
beginning and end of the port list range are
seperated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of
the ports between switch 1, port 3 and switch 2,
port 4 − in numerical order.
Restrictions None.