User`s guide

DES-3226S Layer 2 Switch CLI Reference
72
DES-3226S:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-3226S:4#
show snmp host
Purpose Used to display the recipient of SNMP traps
generated by the switch’s SNMP agent.
Syntax
show snmp host {<ipaddr>}
Description
The show snmp host command is used to
display the IP addresses and configuration
information of remote SNMP managers that are
designated as recipients of SNMP traps that are
generated by the switch’s SNMP agent.
Parameters
<ipaddr> − The IP address of a remote SNMP
manager that will receive SNMP traps
generated by the switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently configured SNMP hosts on the switch: