User`s guide

DES-3226S Layer 2 Switch CLI Reference
59
show snmp community
Purpose Used to display SNMP community strings
configured on the switch.
Syntax
show snmp community {<community_string
32>}
Description
The show snmp community command is used
to display SNMP community strings that are
configured on the switch.
Parameters
<community_string 32> − An alphanumeric
string of up to 32 characters that is used to
identify members of an SNMP community. This
string is used like a password to give remote
SNMP managers access to MIB objects in the
switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently entered SNMP community strings:
DES-3226S:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
-------------------------------- -------------------------------- ------------
dlink ReadView read_write
private CommunityView read_write
public CommunityView read_only
Total Entries: 3