User`s guide

DES-3226S Layer 2 Switch CLI Reference
55
show snmp view
Purpose Used to display an SNMP view previously
created on the switch.
Syntax
show snmp view {<view_name 32>}
Description
The show snmp view command displays an
SNMP view previously created on the switch.
Parameters
<view_name 32> − An alphanumeric string of
up to 32 characters that identifies the SNMP
view that will be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration:
DES-3226S:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
ReadView 1 Included
WriteView 1 Included
NotifyView 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView .3.6.1.6.3.1 Included
Total Entries: 11
DES-3226S:4#