User`s guide

DES-3226S Layer 2 Switch CLI Reference

delete snmp view

Purpose Used to remove an SNMP view entry previously

created on the switch.

Syntax

delete snmp view <view_name 32>

[all|<oid>]

Description

The delete snmp view command is used to

remove an SNMP view previously created on

the switch.

Parameters

<view_name 32> − An alphanumeric string of

up to 32 characters that identifies the SNMP

view to be deleted.

all − Specifies that all of the SNMP views on the

switch will be deleted.

<oid> − The object ID that identifies an object

tree (MIB tree) that will be deleted from the

switch.

Restrictions Only administrator-level users can issue this

command.

Example usage:

To delete a previously configured SNMP view from the switch:

DES-3226S:4#delete snmp view dlinkview all

Command: delete snmp view dlinkview all

Success.

DES-3226S:4#