User`s guide

DES-3226S Layer 2 Switch CLI Reference
53
create snmp view
Purpose Used to assign views to community strings to
limit which MIB objects and SNMP manager can
access.
Syntax create snmp view <view_name 32> <oid>
view_type [included|excluded]
Description The create snmp view command assigns
views to community strings to limit which MIB
objects an SNMP manager can access.
Parameters <view_name 32> − An alphanumeric string of
up to 32 characters that identifies the SNMP
view that will be created.
<oid> − The object ID that identifies an object
tree (MIB tree) that will be included or excluded
from access by an SNMP manager.
included − Include this object in the list of
objects that an SNMP manager can access.
excluded − Exclude this object from the list of
objects that an SNMP manager can access.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To create an SNMP view:
DES-3226S:4#create snmp view dlinkview 1.3.6 view_type
included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DES-3226S:4#