User`s guide

DES-3226S Layer 2 Switch CLI Reference
44
show port_security
Purpose Used to display the current port security
configuration.
Syntax
show port_security {ports <portlist>}
Description This command is used to display port security
information of the switch ports. The information
displayed includes port security admin state,
maximum number of learning address and lock
mode.
Parameters
<portlist> − specifies a range of ports to be
viewed. The port list is specified by listing the
lowest switch number and the beginning port
number on that switch, separated by a colon.
Then the highest switch number, and the
highest port number of the range (also
separated by a colon) are specified. The
beginning and end of the port list range are
seperated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of
the ports between switch 1, port 3 and switch 2,
port 4 − in numerical order.
Restrictions None.