User`s guide

DES-3226S Layer 2 Switch CLI Reference
40
6
PORT SECURITY COMMANDS
The switch port security commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following table.
Command Parameters
config port_security
ports
[<portlist>| all ] {admin_state [enable | disable]
|max_learning_addr <max_lock_no 0-10> |
lock_address_mode[Permanent|
DeleteOnTimeout|DeleteOnReset]}
clear
port_security_entry
vlan_name <vlan_name 32> mac_address
<macaddr> port <port>
show port_security {ports <portlist>}
Each command is listed, in detail, in the following sections.