User`s guide

DES-3226S Layer 2 Switch CLI Reference
34
reset
Purpose Used to reset the switch to the factory default
settings.
Syntax
reset {[config|system]}
Description This command is used to restore the switch’s
configuration to the default settings assigned
from the factory.
Parameters
config − If the keyword ‘config’ is specified, all of
the factory default settings are restored on the
switch including the IP address, user accounts,
and the switch history log. The switch will not
save or reboot.
system − If the keyword ‘system’ is specified all
of the factory default settings are restored on
the switch. The switch will save and reboot after
the settings are changed to default. Rebooting
will clear all entries in the Forwarding Data
Base.
If no parameter is specified, the switch’s current
IP address, user accounts, and the switch
history log are not changed. All other
parameters are restored to the factory default
settings. The switch will not save or reboot.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To restore all of the switch’s parameters to their default values:
DES-3226S:4#reset config
Command: reset config
Success.
DES-3226S:4#