User`s guide

DES-3226S Layer 2 Switch CLI Reference
32
save
Purpose Used to save changes in the switch’s
configuration to non-volatile RAM.
Syntax
Save
Description This command is used to enter the current
switch configuration into non-volatile RAM. The
saved switch configuration will be loaded into
the switch’s memory each time the switch is
restarted.
Parameters None.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To save the switch’s current configuration to non-volatile RAM:
DES-3226S:4#save
Command: save
Saving all settings to NV-RAM... 100%
done.
DES-3226S:4#