User`s guide

DES-3226S Layer 2 Switch CLI Reference
30
enable web
Purpose Used to enable the HTTP-based management
software on the switch.
Syntax
enable web <tcp_port_number>
Description This command is used to enable the Web-
based management software on the switch.
The user can specify the TCP port number the
switch will use to listen for Telnet requests.
Parameters
<tcp_port_number> − The TCP port number.
TCP ports are numbered between 1 and 65535.
The “well-known” port for the Web-based
management software is 80.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To enable HTTP and configure port number:
DES-3226S:4#enable web 80
Command: enable web 80
Success.
DES-3226S:4#