User`s guide

DES-3226S Layer 2 Switch CLI Reference
273
config dst
DST ends.
<end_weekday sun-sat> - The day of the week
in which DST ends expressed using a three
character abbreviation (sun, mon, tue, wed, thu,
fri, sat)
s-mth - Configure the month in which DST
begins.
<start_mth 1-12> - The month to begin DST
expressed as a number.
e-mth - Configure the month in which DST ends.
<end_mth 1-12> - The month to end DST
expressed as a number.
s-time – Configure the time of day to begin DST.
Time is expressed using a 24-hour clock.
e-time - Configure the time of day to end DST.
Time is expressed using a 24-hour clock.
s-date - Configure the specific date (day of the
month) to begin DST. The date is expressed
numerically.
e-date - Configure the specific date (day of the
month) to begin DST. The date is expressed
numerically.
offset - Indicates number of minutes to add or to
subtract during the summertime. The range of
offset are 30,60,90,120; default value is 60
Restrictions Only administrator-level users can issue this
command.