User`s guide

DES-3226S Layer 2 Switch CLI Reference
272
config dst
Parameters disable -Disable the DST seasonal time
adjustment for the switch.
repeating - Using repeating mode will enable
DST seasonal time adjustment. Repeating
mode requires that the DST beginning and
ending date be specified using a formula. For
example, specify to begin DST on Saturday
during the second week of April and end DST
on Sunday during the last week of October.
annual - Using annual mode will enable DST
seasonal time adjustment. Annual mode
requires that the DST beginning and ending
date be specified concisely. For example,
specify to begin DST on April 3 and end DST on
October 14.
s-week - Configure the week of the month in
which DST begins.
<start_week 1-4,last> - The number of the week
during the month in which DST begins where 1
is the first month, 2 is the second month and so
on, last is the last week of the month.
e-week - Configure the week of the month in
which DST ends.
<end_week 1-4,last> - The number of the week
during the month in which DST ends where 1 is
the first month, 2 is the second month and so
on, last is the last week of the month.
s-wday – Configure the day of the week in
which DST begins.
<start_weekday sun-sat> - The day of the week
in which DST begins expressed using a three
character abbreviation (sun, mon, tue, wed, thu,
fri, sat)
e-wday - Configure the day of the week in which