User`s guide

DES-3226S Layer 2 Switch CLI Reference
271
config dst
Purpose Used to enable and configure time adjustments
to allow for the use of Daylight Savings Time
(DST).
Syntax
config dst [disable|repeating
{s-week<start_week 1-4,last>
| s-wday <start_weekday sun-sat>
| s-mth <start_mth 1-12>
| s-time <start_time hh:mm>
| e-week <end_week 1-4,last>
| e-wday <end_weekday sun-sat>
| e-mth <end_mth 1-12>
| e-time <end_time hh:mm>
| offset [30 | 60|90|120]}
| annual {s-date <start_date 1-31>
| s-mth <start_mth 1-12>
| s-time <start_time hh:mm>
| e-date <end_date 1-31>
| e-mth <end_mth 1-12>
| e-time <end_time hh:mm>
| offset [30 | 60 | 90 | 120]}]}
Description DST can be enabled and configured using this
command. When enabled this will adjust the
system clock to comply with any DST
requirement. DST adjustment effects system
time for both manually configured time and time
set using SNTP service.