User`s guide

DES-3226S Layer 2 Switch CLI Reference
262
Example usage:
To configure the stacking mode:
DES-3226S:4#config stack mode disable
Command: config stacking mode disable
Do you want to save the system's configuration to NV-RAM?(y/n)
Saving all configurations to NV-RAM... Done.
Success.
DES-3226S:4#
show stacking
Purpose Used to display the current stacking information.
Syntax
show stacking {mode}
Description This command will display the current stacking
information.
Parameters
mode − When specified this will display the
current stacking mode.
none – No specification will display information
for all switches in the stack. Information
displayed includes MAC address, firmware
version, stacking mode, RPS status and
available port range.
Restrictions None.