User`s guide

DES-3226S Layer 2 Switch CLI Reference
257
show traffic_segmentation
Purpose Used to display the current traffic segmentation
configuration on the switch.
Syntax
config traffic_segmentation <portlist>
forward_list [null|<portlist>]
Description
The show traffic_segmentation command is
used to display the current traffic segmentation
configuration on the switch.
Parameters
<portlist> − Specifies a range of ports for which
the current traffic segmentation configuration on
the switch will be displayed. The port list is
specified by listing the beginning port number
and the highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 specifies
port 3. 4 specifies port 4. 3-4 specifies all of the
ports between port 3 and port 4 − in numerical
order.
Restrictions The port lists for segmentation and the forward
list must be on the same switch.