User`s guide

DES-3226S Layer 2 Switch CLI Reference
245
create access_profile
src_port_mask <hex 0x0-0xffff> − Specifies a TCP
port mask for the source port.
dst_port_mask <hex 0x0-0xffff> − Specifies a TCP
port mask for the destination port.
flag_mask – Specifies examination of TCP flag field
according to the type of flag. Specify all to examine
all type of TCP flag fields.
urg – Specifies urgent TCP flag field.
ack – Specifies acknowledge TCP flag field.
psh - Specifies push TCP flag field.
rst - Specifies reset TCP flag field.
syn - Specifies synchronize TCP flag field. Specifying
the SYN flag will prevent any client from making TCP
connections to the system.
fin - Specifies finish TCP flag field.
udp − Specifies that the Switch will examine each
frame’s Universal Datagram Protocol (UDP) field.
src_port_mask <hex 0x0-0xffff> − Specifies a UDP
port mask for the source port.
dst_port_mask <hex 0x0-0xffff> − Specifies a UDP
port mask for the destination port.
protocol_id − Specifies that the Switch will examine
each frame’s Protocol ID field.
user_mask <hex 0x0-0xffffffff> − Specifies that the
rule applies to the IP protocol ID and the mask
options behind the IP header.
permit − Specifies that packets that match the access
profile are permitted to be forwarded by the Switch.
deny − Specifies that packets that do not match the
access profile are not permitted to be forwarded by
the Switch and will be filtered.
profile_id <value 1-255> − Specifies an index number
that will identify the access profile being created with