User`s guide

DES-3226S Layer 2 Switch CLI Reference
244
create access_profile
mask for the source MAC address. This mask is
entered in the following hexadecimal format:
destination_mac <macmask> − Specifies a MAC
address mask for the destination MAC address.
802.1p − Specifies that the Switch will examine the
802.1p priority value in the frame’s header.
ethernet_type − Specifies that the Switch will
examine the Ethernet type value in each frame’s
header.
ip − Specifies that the Switch will examine the IP
address in each frame’s header.
vlan − Specifies a VLAN mask.
source_ip_mask <netmask> − Specifies an IP
address mask for the source IP address.
destination_ip_mask <netmask> − Specifies an IP
address mask for the destination IP address.
dscp − Specifies that the Switch will examine the
DiffServ Code Point (DSCP) field in each frame’s
header.
icmp − Specifies that the Switch will examine the
Internet Control Message Protocol (ICMP) field in
each frame’s header.
type − Specifies that the Switch will examine each
frame’s ICMP Type field.
code − Specifies that the Switch will examine each
frame’s ICMP Code field.
igmp − Specifies that the Switch will examine each
frame’s Internet Group Management Protocol (IGMP)
field.
type − Specifies that the Switch will examine each
frame’s IGMP Type field.
tcp − Specifies that the Switch will examine each
frames Transport Control Protocol (TCP) field.