User`s guide

DES-3226S Layer 2 Switch CLI Reference
240
Command Parameters
udp src_port_mask <hex 0x0-0xffff>
dst_port_mask <hex 0x0-0xfff>
protocol_id
user_mask <hex 0x0-0xffffffff>
permit
deny
p
rofile
_
id <value 1-255>
}
delete access
_p
rofile
profile_id <value 1-255>
config access_profile
profile_id <value 1-255>
add access_id <value 1-255>
ethernet
vlan <vlan_name 32>
source_mac <macaddr>
destination_mac <macaddr>
802.1p <value 0-7>
ethernet_type <hex 0x0-0xfff>
ip
vlan <vlan_name 32>
source_ip <ipaddr>
destination_ip <ipaddr>
dscp <value>
icmp
type <value 0-255>
code <value 0-255>
igmp
type <value 0-255>
tcp
src_port <value 0-65535>
dst_prot <value 0-65535>
flag [ all |
{ urg | ack | psh | rst | syn | fin } ] }
udp
src_port <value 0-65535>
dst_port <value 0-65535>
protocol_id <value 0-255>