User`s guide

DES-3226S Layer 2 Switch CLI Reference
238
show radius
Purpose Used to display the current Radius
configurations on the switch.
Syntax
show radius
Description The show radius command is used to display
the current Radius configurations on the switch.
Parameters None.
Restrictions None.
Example usage:
To display Radius settings on th switch:
DES-3226S:4#show radius
Command: show radius
Index IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- ----------- ------------
1 10.1.1.1 1812 1813 Active switch
2 20.1.1.1 1800 1813 Active des3226
3 30.1.1.1 1812 1813 Active dlink
Total Entries : 3
DES-3226S:4#