User`s guide

DES-3226S Layer 2 Switch CLI Reference
236
config radius
Purpose Used to configure the switch’s Radius settings.
Syntax
config radius <server_index 1-3> {ipaddress
<server_ip> {ipaddress <server_ip>|key
<passwd 32>|auth_port
<udp_port_number>|acct_port
<udp_port_number>}
Description
The config radius command is Used to
configure the switch’s Radius settings.
Parameters
<server_index 1-3> − Assigns a number to the
current set of Radius server settings. Up to 3
groups of Radius server settings can be entered
on the switch.
<server_ip> − The IP address of the Radius
server.
key − Specifies that a password and encryption
key will be used between the switch and the
Radius server.
<passwd 32> − The shared-secret key used by
the Radius server and the switch. Up to 32
characters can be used.
default − Returns all of the ports in the range to
their default Radius settings.
auth_port <udp_port_number> − The UDP port
number for authentication requests. The default
is 1812.
acct_port <udp_port_number> − The UDP port
number for accounting requests. The default is
1813.
Restrictions Only administrator-level users can issue this
command.