User`s guide

DES-3226S Layer 2 Switch CLI Reference
233
config radius add
Purpose Used to configure the settings the switch will
use to communicate with a Radius server.
Syntax
config radius add <server_index 1-3>
<server_ip> key <passwd 32>
[default|{auth_port <udp_port_number>|
acct_port <udp_port_number>}]
Description
The config radius add command is used to
configure the settings the switch will use to
communicate with a Radius server.
Parameters
<server_index 1-3> Assigns a number to the
current set of Radius server settings. Up to 3
groups of Radius server settings can be entered
on the switch.
<server_ip> The IP address of the Radius
server.
key Specifies that a password and encryption
key will be used between the switch and the
Radius server.
<passwd 32> The shared-secret key used by
the Radius server and the switch. Up to 32
characters can be used.
default Returns all of the ports in the range to
their default Radius settings.
auth_port <udp_port_number> The UDP port
number for authentication requests. The default
is 1812.
acct_port <udp_port_number> The UDP port
number for accounting requests. The default is
1813.
Restrictions Only administrator-level users can issue this
command.