User`s guide

DES-3226S Layer 2 Switch CLI Reference
226
config 802.1x auth_parameter
enable_reauth [enabled|disabled] − Determines
whether or not the switch will re-authenticate.
Enabled causes re-authentication of users at
the time interval specified in the Re-
authentication Period field, above.
Restrictions Only administrator-level users can issue this
command.
Example usage:
To configure 802.1x authentication parameters for ports 1 – 20 of
switch 1:
DES-3226S:4#config 802.1x auth_parameter ports 1:1 – 1:20
direction both
Command: config 802.1x auth_parameter ports 1:1-1:20 direction
both
Success.
DES-3226S:4#