User`s guide

DES-3226S Layer 2 Switch CLI Reference
225
config 802.1x auth_parameter
controlled port blocks communication in both the
receiving and transmitting directions, or just the
receiving direction.
port_control − Configures the administrative
control over the authentication process for the
range of ports.
force_auth − Forces the Authenticator for the
port to become authorized. Network access is
allowed.
auto − Allows the port’s status to reflect the
outcome of the authentication process.
force_unauth − Forces the Authenticator for the
port to become unauthorized. Network access
will be blocked.
quiet_period <sec 0-65535> − Configures the
time interval between authentication failure and
the start of a new authentication attempt.
tx_period <sec 1-65535> - Configures the time
to wait for a response from a supplicant (user)
to send EAP Request/Identity packets.
supp_timeout <sec 1-65535> - Configures the
time to wait for a response from a supplicant
(user) for all EAP packets, except for the
Request/Identity packets.
server_timeout <sec 1-65535> - Configure the
length of time to wait for a response from a
Radius server.
max_req <value 1-10> − Configures the number
of times to retry sending packets to a supplicant
(user).
reauth_period <sec 1-65535> − Configures the
time interval between successive re-
authentications.