User`s guide

DES-3226S Layer 2 Switch CLI Reference
218
show 802.1x
Capability: Authenticator|None − Shows the
capability of 802.1x functions on the port
number displayed above. There are four 802.1x
capabilities that can be set on the switch:
Authenticator, Supplicant, Authenticator and
Supplicant, and None.
Port Status: Authorized|Unauthorized − Shows
the result of the authentication process.
Authorized means that the user was
authenticated, and can access the network.
Unauthorized means that the user was not
authenticated, and can not access the network.
PAE State: Initialize|Disconnected|Connecting|
Authenticating|Authenticated|Held
|ForceAuth|ForceUnauth − Shows the current
state of the Authenticator PAE.
Backend State: Request|Response|Fail|
Idle|Initalize − Shows the current state of the
Backend Authenticatior.
AdminCtlDir: Both|In − Shows whether a
controlled Port that is unauthorized will exert
control over communication in both receiving
and transmitting directions, or just the receiving
direction.
OpenCtlDir: Both|In − Shows whether a
controlled Port that is unauthorized will exert
control over communication in both receiving
and transmitting directions, or just the receiving
direction.
Port Control: ForceAuth|ForceUnauth|Auto −
Shows the administrative control over the port’s
authorization status. ForceAuth forces the
Authenticator of the port to become Authorized.
ForceUnauth forces the port to become