User`s guide

DES-3226S Layer 2 Switch CLI Reference
213
20
802.1X COMMANDS
The DES-3226S implements the server-side of the IEEE 802.1x Port-based
and MAC-based Network Access Control. This mechanism is intended to
allow only authorized users, or other network devices, access to network
resources by establishing criteria for each port on the switch that a user or
network device must meet before allowing that port to forward or receive
frames.
Command Parameters
enable 802.1x
disable 802.1x
show 802.1x [auth_state | auth_configuration] {ports
<portlist>}
config 802.1x
capability
ports <portlist>|all
authenticator
none
config 802.1x
auth_parameter
ports <portlist>|all
default
direction [both|in]
port_control
[force_unauth|auto|force_auth]
quiet_period <sec 0-65535>
tx_period <sec 1-65535>
supp_timeout <sec 1-65535>
server_timeout <sec 1-65535>
max_req <value 1-10>
reauth_period <sec 1-65535>