User`s guide

DES-3226S Layer 2 Switch CLI Reference
198
19
IGMP SNOOPING COMMANDS
The Switch port commands in the Command Line Interface (CLI) are listed
(along with the appropriate parameters) in the following table.
Command Parameters
config
igmp_snooping
<vlan_name 32>
all
host_timeout <sec 1-16711450>
router_timeout <sec 1-16711450>
leave_timer <sec 0-16711450>
robustness_variable <value 1-255>
last_member_query_interval <sec 1-25>
state [enable|disable]
config
igmp_snooping
querier
<vlan_name 32>
all
query_interval <sec 1-65535>
max_response_time <sec 1-25>
robustness_variable <value 1-255>
last_member_query_interval <sec 1-25>
state [enable|disable]
config router_ports <vlan_name 32> [add|delete]
<portlist>
enable igmp
snooping
forward_mcrouter_only
show igmp
snooping
vlan <vlan_name 32>