User`s guide

DES-3226S Layer 2 Switch CLI Reference
191
config lacp_ports
LACP ports (see above).
Restrictions Only administrator-level users can issue this
command.
Note: For LACP implementations, both devices
utilizing the aggregated link must support IEEE
802.1ad Link Aggregation Control Protocol and
one device must designate the participating
ports as “active” while this other device must
designate the participating ports as “passive”.
Example usage:
To configure LACP port mode settings:
DES-3226S:4#config lacp_port 1-12 mode active
Command: config lacp_port 1-12 mode active
Success.
DES-3226S:4#